Family-owned general contractor serving Winter Garden, Orlando & Central Florida since 2008

Mon–Fri 8am–6pm

Boat Lift Installation in Winter Garden, FL.

St. Cyr Contracting installs boat lifts for lakefront homes in Winter Garden, Windermere, and across Central Florida. We size the lift to your boat and your water, build the structure that supports it, and manage the permits, with a state-licensed electrical contractor wiring the motor and controls. One fixed-price contract, one point of contact.

Licensed Florida GC

Licensed & insured

Permits Handled

County and state

1-Year Warranty

On all work we perform

17+ Years

250+ completed projects

A boat lift keeps your hull out of the water, away from algae growth, wave wear, and the damage that comes from sitting in a slip through a Florida summer. On the Butler Chain of Lakes, Lake Apopka, Johns Lake, and the lakes around Clermont, the right lift depends on three things: what your boat actually weighs, how deep the water is at your slip, and what your dock or shoreline can carry. We start every boat lift installation there. St. Cyr Contracting is a licensed Florida general contractor, so the lift, the pilings or framing that hold it, and the permit package are handled together under one fixed-price contract, by our own crew.

Two-story wood-framed house under construction with sheathing installed

Types of boat lifts we install.

Lift choice comes down to the boat, the water depth, and what is already at the shoreline. These are the common options on Central Florida lakes:

  • Cradle (boathouse) lifts: beams and cradle bunks hung from a boathouse or covered dock. A clean look, but the structure has to be checked and often reinforced to carry the boat plus the lift.
  • Vertical (four-post) lifts: freestanding or piling-mounted lifts that raise the boat straight up. The most common choice for ski boats, wake boats, and center consoles.
  • Elevator lifts: mounted to the face of a dock or wall, raising the boat on vertical tracks. Useful where space beside the dock is tight.
  • Floating lifts: air-tank or pontoon-style platforms that rise and fall with the water. A good fit where lake levels swing or the bottom is too soft for pilings.
  • PWC lifts: smaller drive-on or cradle lifts for jet skis and personal watercraft, often added beside a main lift.

We will tell you at the walkthrough which type fits your shoreline. Not every lot suits every lift, and the cheapest lift is not a bargain if the structure it hangs on cannot carry it.

Side of a completed home with a raised lanai and block retaining wall

Sizing a lift to your boat and your water.

Most boat lift problems trace back to sizing. Before we recommend a lift, we work through each of these:

  • Weight capacity: the lift rating has to cover the boat fully loaded, including engine, fuel, water, batteries, and gear, with margin to spare. Published dry weights leave much of that out.
  • Water depth at the slip: we measure where the boat will sit, not at the end of the dock. Central Florida lake levels move with rainfall and drought, so the lift has to work at low water and still clear the hull at high water.
  • Hull, beam, and length: bunk and cradle spacing must match the hull. A pontoon, a wake boat, and a center console sit on very different setups.
  • Bottom conditions: sand, muck, and clay hold pilings differently. Soft bottoms can call for longer pilings or a floating lift instead.
  • Canopy: a canopy protects the boat from sun and rain, but it adds wind load and has to stay within permitted dimensions.
Exterior wall sheathing and weather barrier with scaffolding during a renovation

Pilings, structure, and electrical.

A lift is only as good as what holds it up, and that is where a general contractor earns the job. Our part of the work is the structure:

  • Piling-mounted lifts: pilings set to the depth that the bottom and the lift load require, with the lift frame attached to them.
  • Dock and boathouse-mounted lifts: we check whether the existing framing, pilings, and connections can carry the added load, and reinforce them before anything is hung from them.
  • Hardware built for the water: fasteners, brackets, and cables rated for constant moisture and Florida sun.
  • Electrical: lift motors and controls need a dedicated circuit with GFCI protection. In Florida that wiring is done by a state-licensed electrical contractor under its own electrical permit. We coordinate that work as part of your project, so you still have one point of contact.

What we do not build: St. Cyr Contracting installs boat lifts and the structural work that supports them. We do not build new docks or seawalls. If your dock needs to be replaced before it can take a lift, we will tell you that up front. If you are planning larger changes to a lakefront property, such as a home addition or a new custom home, we can plan the lift as part of that work.

Cleared construction site with silt fence and stakes set for site work

Permits for boat lifts in Orange and Lake County.

Work over the water gets more review than work on land, and more than one agency can be involved. Depending on the lake and the jurisdiction, a boat lift project can include:

  • County environmental review: in unincorporated Orange County, the Environmental Protection Division reviews dock construction for environmental impacts, side setbacks, roof height, and platform size. For a new dock, the EPD permit comes before the county building permit.
  • Building permit: the lift and its supporting structure are permitted and inspected through the local building department. Lake County, the Town of Windermere, and the City of Clermont each run their own process, so we confirm the requirements for your parcel before the design is final.
  • State authorization: the bottom of many Florida lakes is state-owned submerged land, and using it requires written authorization from the Florida Department of Environmental Protection. DEP rules also limit a roof over a lift to no more than one foot of overhang beyond the lift and the boat stored on it.
  • Electrical permit: pulled by the licensed electrical contractor for the motor and controls.
  • HOA and lake rules: many lakefront communities have their own dock and boathouse covenants, and lakes on the Butler Chain have an advisory committee that reviews projects.

Replacing a lift in the same footprint is often simpler than adding a new one, but it still needs to be checked. We prepare the package, answer reviewer comments, and schedule inspections. We work on lakefront properties in Windermere, Clermont, Winter Garden, and across the area.

Completed single-story home exterior with a dark roof under a cloudy sky

What does a boat lift cost in Central Florida?

Boat lift cost depends on capacity, lift type, and what it takes to support the lift. Published market data gives a useful starting point:

  • By lift type (HomeAdvisor, national data): freestanding lifts such as vertical, pontoon, and cantilever models run about $1,000 to $15,000. Pile-mounted lifts run about $1,500 to $8,000, and PWC lifts about $1,000 to $2,000. A canopy adds roughly $500 to $2,000.
  • By capacity (Boatzon 2026 guide): about $4,000 to $9,000 for 4,000 to 6,000 lb lifts, $7,000 to $15,000 for 7,000 to 10,000 lb, and $12,000 to $25,000 for 12,000 to 16,000 lb.
  • Installation (Boatzon 2026 guide): roughly $500 to $3,000 for straightforward installs. New pilings, electrical work, and permits add to that.

The biggest swing factors are new pilings versus mounting to an existing structure, the boat weight, water depth, the length of the electrical run, and how many agencies have to review the project.

These ranges come from published market data, not from our own price list. St. Cyr Contracting prices every boat lift project individually after a walkthrough, and our fixed-price contract means the number you sign is the number you pay.

Adding a boat lift?

Schedule a consultation with Mo to look at your shoreline, measure the water at your slip, and talk through the right lift for your boat.

Why St. Cyr

  • Licensed Florida General Contractor
  • Our own crew, framing to finish
  • Direct supplier pricing passed to you
  • Fixed-price contracts, no surprises
  • 1-year workmanship warranty
  • Family-owned since 2008

Common Questions

Questions about boat lift installation in Central Florida.

Start with the fully loaded weight of the boat: dry weight plus engine, fuel, water, batteries, and gear. The lift rating should exceed that with margin. Water depth, hull shape, and beam matter too, so we measure at your slip before recommending a lift.

In most cases, yes. Work over the water can involve county environmental review, a building permit, state authorization to use submerged lands, and an electrical permit for the motor. Requirements vary by lake and jurisdiction, and we confirm what applies to your property before work starts.

Often, but only if the dock can carry the load. We inspect the framing, pilings, and connections first. If the dock is not strong enough, a freestanding or piling-mounted lift may be the better option, or the dock may need work before a lift goes on.

Lift motors and controls need a dedicated, GFCI-protected circuit. In Florida that work is done by a state-licensed electrical contractor under an electrical permit. We coordinate it as part of your project, so you have one point of contact.

No. We install boat lifts and do the structural work that supports them, such as pilings and reinforcement of existing dock or boathouse framing. If a new dock or seawall is needed, we will tell you up front.

Other services we do well.

Carport Installation

Engineered, permitted carports for RVs, boats, and trailers, built for Florida wind.

Home Additions

Room additions, primary suites, and second stories under one fixed-price contract.

Custom Home Construction

Ground-up custom homes in Winter Garden and Central Florida, built by a licensed general contractor.

Whole Home Renovations

Kitchens, baths, flooring, and structural changes under one contract and one crew.

Ready to get your boat out of the water?

Schedule a consultation with Mo to look at your dock and shoreline, talk through lift options, and get a clear plan for permits. We serve lakefront homes in Winter Garden, Windermere, Clermont, Orlando, and across Central Florida.

Scroll to Top